Lathes & Turning Centers
1990 MAZAK QUICK TURN 15N UNIVERSAL CNC LATHE * PARTS ONLYSN: 93160SPECIFICATIONS:MAX. SWING DIAMETER 440 MMMAX. MACHINING DIAMETER 225 MMMAX. MACHINING LENGTH 444 MMMAX. BAR MATERIAL DIAMETER 51 MMSPINDLE SPEED 45 – 4.500 RPMMAIN SPINDLE MOTOR 15 KWMAX. TORQUE 230 NMSPINDLE NOSE A2 – 6 ''SPINDLE BORE 61 MMTURRET TOOL CAPACITY 12X-AXIS STROKE 220 MMZ-AXIS STROKE 510 MMRAPID TRAVERSE RATE:X/Z-AXIS 30 M/MINX/Z-AXIS 5.000 MM/MINTAILSTOCK CENTER MK 4TAILSTOCK TRAVEL 460 MMTAILSTOCK QUILL STROKE 130 MMAll specifications are assumed to be correct but must be confirmed by the purchasing entity.Item Location - East Hartford, CT
1992 HARDINGE CONQUEST 42 CS-42 CNC TURNING CENTER, LATHESN: CS-0008220-02SPECIFICATIONS:HOLE THRU SPINDLE: 1.875″SWING UPPER WAY COVERS: 19.5″SWING LOWER WAY COVERS: 14.5″X AXIS TRAVERSE: 472 IPMZ AXIS TRAVERSE: 630 IPMDISTANCE SPINDLE TO TURRET: 14″X AXIS TRAVEL: 5.45″Z AXIS TRAVEL: 13.65″MAX TURNING DIAMETER: 9.1″DISTANCE BETWEEN CENTERS: 13.8″All specifications are assumed to be correct but must be confirmed by the purchasing entity.Item Location - Woodstock, GA
1996 DOOSAN DAEWOO PUMA 12L-B CNC LATHE, MITSUBISHI CONTROLSN: PL120904SPECIFICATIONS:X-AXIS TRAVEL............ 10.3"Z-AXIS TRAVEL............ 41.3"SPINDLE NOSE........ ASA A2-8CHUCK SIZE .............. 12"MAX BAR CAPACITY......... 3.5"DRAW TUBE BORE........... 4"SWING OVER BED........... 22.4"SWING OVER CARRIAGE...... 14.7"MAX TURNING DIA.......... 19”MAX TURNING LENGTH....... 40.2"SPINDLE SPEEDS........... 3,000 RPMSPINDLE MOTOR............ 35 HPTURRET STATIONS...........10220V 3PH 50/60HZ 125AEQUIPPED WITH:CHIP CONVEYORTAILSTOCKDUST COLLECTORPARTS CATCHER12" CHUCKAll specifications are assumed to be correct but must be confirmed by the purchasing entity.Item Location - Loveland, CO
1996 LICO LNC-42 CNC AUTOMATIC TURNING CENTERSPECIFICATIONS:BAR CAPACITY (COLLET) 1.625 INCHESMAX SWING 10.2 INCHESMAX TURNING DIAMETER 6.5 INCHESMAX TURNING LENGTH (COLLET) 11.8 INCHESMAX SPINDLE SPEED 5,000 RPMSPINDLE MOTOR OUTPUT (CONT.) 7.5 HPSPINDLE NOSE ISO A2-5X-AXIS TRAVEL (CROSS) 11.8 INCHESZ-AXIS TRAVEL (LONGITUDINAL) 11.8 INCHESRAPID TRAVERSE (X/Z) ~400/590 IPMTOOL TURRET POSITIONS 8TURNING TOOL SECTION 3/4 INCHBORING TOOL RECEPTION Ø1 INCHAPPROX. MACHINE WEIGHT (NET) 4,700 LBSAPPROX. DIMENSIONS (L X W X H) 80 X 85 X 68 INCHESAll specifications are assumed to be correct but must be confirmed by the purchasing entity.Item Location - Mooresville, NCNO OUT OF STATE MANUFACTURING SALES TAX EXEMPTION
1996 SHARP 1660C 60" CENTER 7.5 HP GEARED-HEAD GAP-BED ENGINE LATHESN: 5810012SPECIFICATIONSSWING OVER BEDWAYS: 16"SWING IN REMOVEABLE GAP: 24-3/8"SWING OVER CROSS SLIDE: 8-3/4"HOLE THRU SPINDLE: 2-1/8"DISTANCE BETWEEN CENTERS: 60"SPINDLE NOSE: D1-6" CAMLOCKSPINDLE SPEED RANGE (12): 20 - 2000 RPMENGLISH THREADING RANGE: 4 - 56 TPIMETRIC THREADING RANGE : .5 - 7 MMLONGITUDINAL FEED RANGE: .002" - .032" IPRCROSS FEED RANGE: .001" - .0094" IPRTAILSTOCK SPINDLE TAPER : #4MTTAILSTOCK SPINDLE TRAVEL: 5"APPROX FLOOR SPACE: 105"L X 30"W X 48"HAPPROX WEIGHT: 3,750 LBSAll specifications are assumed to be correct but must be confirmed by the purchasing entity.Item Location - Cookeville, TNNO OUT OF STATE MANUFACTURING SALES TAX EXEMPTION
2000 HAAS SL-40T CNC TURNING CENTERCHUCK SIZE: 15″MAX TURN DIA: 25.5″MAX TURN LENGTH: 40″BAR CAPACITY: 4″SPINDLE SPEED: 2,400 RPMSPINDLE POWER: 55 HPMAX SWING: 40″DIMENSIONS: 190″X98″X86″WEIGHT: 25,000LBSEQUIPPED WITH:HAAS CNC CONTROLCHIP CONVEYORTOOL PRESETTERALL AVAILABLE MANUALSAll specifications are assumed to be correct but must be confirmed by the purchasing entity.Item Location - Frankfort, NY
2008 DOOSAN LYNX 220G CNC LATHEMAX SWING OVER BED: 23.2″MAX TURNING DIAMETER: 6.6″MAX TURNING / MACHINING LENGTH: 14.2″BAR CAPACITY: 1.75″CHUCK SIZE: 6″SPINDLE SPEED: 6,000 RPMSPINDLE POWER: 20 HPSPINDLE NOSE: A2-5X-AXIS TRAVEL: 17.7″Z-AXIS TRAVEL: 13″APPROX. DIMENSIONS: 92″ L × 65″ W × 78″ HAPPROX WEIGHT: 6,000 LBSAll specifications are assumed to be correct but must be confirmed by the purchasing entity.Item Location - Newton, NH
2010 OKUMA IMPACT LU45-IIM 3000MM CNC TURNING CENTERCHUCK SIZE: 15″MAX. SWING OVER BED: 33.46″MAX. TURNING DIAMETER: 22.83″MAX. TURNING LENGTH: 118.11″BAR CAPACITY: 4.33″SPINDLE SPEED RANGE: 3000 RPMSPINDLE MOTOR: 30 HPSPINDLE NOSE: A2-11NUMBER OF TURRETS: 2NUMBER OF TOOL POSITIONS: 12 AND 10X-AXIS TRAVEL: 11.81″Z-AXIS TRAVEL: 37.4″RAPID TRAVERSE RATE (X/Z): 787/945 IPMMACHINE WEIGHT: 33,070 LBSMACHINE DIMS (L X W X H): 205 X 90 X 94″CONTROL: OSP 300LOPTIONS INCLUDED –LIVE TOOLINGDUAL TURRETSEXTENDED TAILSTOCKSTEADYRESTAIRBLOWAUTO DOORSERVICE REPORTS AVAILABLE UPON REQUESTCOMPLETED IN DECEMBER 2019NOTES: 12.16.19 REPLACED DOOR INTER-LOCKS AND DOOR LIMIT SWITCHES.12.17.19 REPLACED 3 OPERATOR WINDOWS. REPLACED LIGHT GLASS ON OPERATES LIGHT. AND STARTED TO REPLACE LEFT DOOR AIR CYLINDER. FOUND AN ISSUE WITH ONE OF THE COVERS BEHIND LEFT SIDE OPERATORS DOOR MAKING CONTACT WITH THE DOOR . WE FOUND SCREWS MISSING. COVER IS NOW SECURED AND OUT OF THE WAY OF DOOR.12.18.19 COMPLETED INSTALLING BOTH SIDES OF AIR CYLINDERS AND MANIFOLDS ON BOTH SIDES.12.19.19 ADJUSTED AIR CYLINDER AND DISASSEMBLED TURRET TO BEGIN REBUILDING THE MILLING DRIVE.12.20.19 REPLACED ALL SEALS OTHER THAN TWO DUE TO NOT BEING ABLE TO GET THE COLLAR OFF TO REPLACE PN: C5420-354850 AND PN: C6114-400580. THEY ARE IN THE MACHINE CRIB BY THE MACHINE. ALSO REPLACED THE DOOR OPEN LIMIT SWITCHES.$150,000++ WORTH OF WORKAll specifications are assumed to be correct but must be confirmed by the purchasing entity.Item Location - St. Louis, MO
2014 OKUMA GENOS L300-MW MULTI AXIS CNC TURNING CENTERX-AXIS MOVEMENT: 9.3″Z-AXIS MOVEMENT: 18.1″C-AXIS MOVEMENT: 14.1″WORKPIECE DRM: 11.8″NUMBER OF AXIS: 4NUMBER OF SPINDLES: 2SPINDLE SPEED RANGE: 3000 1/MINAPPROX. DIMENSIONS: 119.3″ X 88.1″ X 87″APPROX. WEIGHT: 5300 KGEQUIPPED WITH:CONTROL MODEL: OSP-P300L-RAll specifications are assumed to be correct but must be confirmed by the purchasing entity.Item Location - Claremont, NH
2015 GANESH GT-3080 BB CNC TURNING CENTERCHUCK SIZE: 25″MAX TURNING DIA: 24″MAX TURNING LENGTH: 80″SWING OVER BED: 30″SWING OVER CROSS-SLIDE: 19″BORE SIZE: 10″SPINDLE SPEEDS: 18 – 600 RPMSPINDLE MOTOR HORSEPOWER: 30 HPDIMENSIONS: 222” X 85” X 80”WEIGHT: 13,300 LBSEQUIPPED WITH:FANUC OI-TD CNC CONTROL25″ 3 JAW CHUCKPROGRAMMABLE TAILSTOCK8-STATION TOOL TURRETSTEADY RESTCHIP CONVEYORALL AVAILABLE MANUALSCHUCK SIZE: 25″MAX TURNING DIA: 24″MAX TURNING LENGTH: 80″SWING OVER BED: 30″SWING OVER CROSS-SLIDE: 19″BORE SIZE: 10″SPINDLE SPEEDS: 18 – 600 RPMSPINDLE MOTOR HORSEPOWER: 30 HPDIMENSIONS: 222” X 85” X 80”WEIGHT: 13,300 LBSEQUIPPED WITH:FANUC OI-TD CNC CONTROL25″ 3 JAW CHUCKPROGRAMMABLE TAILSTOCK8-STATION TOOL TURRETSTEADY RESTCHIP CONVEYORALL AVAILABLE MANUALSAll specifications are assumed to be correct but must be confirmed by the purchasing entity.Item Location - Pasadena, TX
2017 OKUMA 2SP-250H TWIN SPINDLE TWIN TURRET CNC TURNING CENTERMAX TURNING DIAMETER: 8.66″MAX TURNING LENGTH: 5.91”TRAVEL X-AXIS: 5.91”Z-AXIS: 6.10”SPEED RANGE: 50-4500 RPMTURRET TYPE: V12 NCMOTOR SPINDLE DRIVE: 15/10 HPEQUIPPED WITH:OKUMA OSP-P300LA CONTROLROBOT LOADERCHIP CONVEYORTRANSFORMER220/480, 3 PHASE, 60 HZ, 55.1 KVA, FULL LOAD CURRENT 144.7 / 66.3 A, LARGEST MOTOR RATING 48 A, INTERRUPTING CAPACITY 30 / 10 KA, SCCR OF CONTROL PANEL 10 KA**HAVE INSPECTION REPORTS FROM GOSIGER**MACHINE POWERED ON WITHOUT ANY MAJOR ALARMSHAD TO SET THE COOLANT LOW INPUT AND AIR PSI INPUT IN ORDER TO MOVE THE AXISMACHINE HAD A BATTERY LIFE ALARM DUE TO BEING OUT OF SERVICE, BACKUPS PERFORMEDTHE MACHINE HAD A BROKEN LOAD CABLE TRACK ON TOP AND WAS MISSING THE CHUCKS R-L SIDEAXIS AND SPINDLE OPERATE NORMALLYLOADER AXIS OPERATE NORMALLYMACHINE WAS TEST WITHOUT STOCKER TABLE INSTALLED AND APPEARS THAT WHEN IT WAS IN OPERATION THE PARTS WERE PLACED ON A CONVEYOR. INBOUND OUTBOUND.All specifications are assumed to be correct but must be confirmed by the purchasing entity.Item Location - Franklin, IN
ASSORTED LATHE ACCESSORIESItem Location - Cookeville, TNNO OUT OF STATE MANUFACTURING SALES TAX EXEMPTION
